A connector is small enough to overlook and important enough to stop a production line. That mismatch is why specification deserves a little structure. This article breaks down IP67 vs IP68 into decisions you can check, test and document.
Reading an Ingress Protection Code
The first digit describes protection against solid particles and the second against water, so the same leading 6 in IP67 and IP68 means both are dust-tight.
It is worth pausing here: this choice affects everything downstream, from cable selection to service procedure.
The Real Difference Is the Water Test
IP67 covers temporary immersion under defined conditions, while IP68 refers to continuous immersion under conditions agreed between buyer and supplier.
Ask Which Conditions Were Tested
IP68 is only meaningful when depth and duration are stated, because the number alone does not define a single universal test.
Field experience makes this clearer than any single number can, since real installations expose the edges of a specification.
The Seal System Decides the Result
Cable outlet diameter, gasket compression and panel sealing all affect whether a rated connector performs in the field.
Balance Protection Against Cost
Specifying the highest rating is not automatically better; choose the level the installation truly needs and verify how it will be achieved.
This is the point where a specification usually becomes decisive, because every later decision depends on it.
Good interconnect decisions are made early and documented clearly. Treat this guide as a checklist: work through each decision, record the answer, and the specification largely writes itself. For a cross-reference or a custom build, our team can help verify the details.